ANNEXURE 1
Specifications for STRAIGHT RUN FUEL OIL/ MAZUT M100 (GOST 10585/75) Type-I
Certificate of Quality
COMPONENT RESULT
1 Ash content, not more % 0.14
2 Mass fraction of sulphur, not more % - low-sulphur-residual-oil 0.5
3 Temperature of the flash, not less deg. C in the closed crucible 110 min
4 The temperature of solidification, not higher C 25
5 Kinematics viscosity 118 max
6 Water content % 0.5
7 Mechanical impurities lower than % 0.1
8 Acidity lower than, mg/KOH/100ml 5
9 Alkalinity nil
10 Gross calorific value Kcal/kg/KJ/kg 9700/41300 min
11 Density at 20 deg. C/Kg/l 0.8900-0.9200
12 Hydrogen Sulfide Content (H2S) ppm 0.5 max
13 Carbon residual, lower than % 7
14 Vanadium (V) ppm 23
15 Aluminum (Al) ppm 5
16 Silicon (Si) ppm 12
17 Nickel (Ni) ppm 29
18 Asphaltense m/m, % 4
19 Distillation @ 4 mm Hg
Extracted to760 mm Hg
Initial Boiling Point deg. C
5% recovered deg. C
10% recovered deg. C
20% recovered deg. C
30% recovered deg. C
40% recovered deg. C
50% recovered deg. C
60% recovered deg. C
75% recovered deg. C
80% recovered deg. C
95% recovered deg. C
Final Boiling point deg. C
Percent recovered vol
Residual vol
Total nitrogen m/m
216
259
310
358
445
502
534
538
545
-
550
560
78%
22%
0.192%
20 Sodium (Na) ppm 15
M100-75.doc